How to Clean Car Tyres for Best Results

How to Clean Car Tyres for Best Results
August 13, 2021 Comments Off on How to Clean Car Tyres for Best Results Blog Betty Davis

Car tyres are an essential part of a vehicle as they carry the weight of the entire vehicle and are responsible for cornering and traction. Special care needs to be given to car tyres so that motorists do not encounter any problems during their journey. Maintenance also increases the life span of the wheels. By keeping the tyres clean, you can make sure that the wheels stay free from containments that can damage the tyre wall. It also helps remove any browning that may occur over time. An important part of tyre maintenance is washing them regularly. Special attention should be given when washing car tyre to avoid damaging them and ensure that they are properly cleaned.

The following can be followed as a step-by-step guide for washing car tyres for getting optimum results.

Assess the Tyres

Before washing the tyres, simply have a look at the tyres to assess how much graft can you expect. This can be determined by wiping the wheel with a microfiber towel or an old rag and see how much dirt comes off.

Pre-rinse the Wheels

The next step is to pre-rinse the wheels using a pressure washer. Wash the tyre thoroughly to remove as much dirt as possible. It is best to avoid the paintwork around the car wheels. Go around the vehicle and repeat this procedure for all four wheels. This step should be undertaken for all wheels before moving on with the wash. Car owner should not worry about the wheels drying as the cleaning process has just started and there is still work to be done on them.

Also read: Everything You Need To Know About Car Tire Size

Pre-rinse the Wheels

Use the Degreaser

A degreaser can now be applied as it is or by diluting it. The results are similar so you can consider diluting it as well. In the case of diluted solution, you will need to apply more elbow grease. Apply a generous amount to cover the wheel properly and then leave it on for a minute. During summers, keep in mind that it will dry quickly so you may want to reduce this time. If the wheel is extremely dirty, it will start to lift some of the product immediately.

Use the Degreaser

Start Scrubbing

Use a brush to work the degreaser into the tyre. Choose the brush with careful consideration to make sure that the brush is not extremely rigid. Work on the tyre walls but avoid scrubbing the paintwork to avoid any damage. Scrub properly to make sure that you can take out as much dirt as possible.

Start Scrubbing

In the case of some degreasers, you will notice that they will start to create light foam as the brush is scrubbed against the tyre. The foam will also have dirt on it. This is a good sign that the degreaser and your cleaning efforts are working.

Power Wash the Wheels

Once you are satisfied with scrubbing, it is now time to wash them thoroughly. Wash the wheels properly to make sure all the existing dirt is removed. Take your time to rinse the wheels. After the wash, closely inspect the wheels to check if all the dirt and product have been removed. If you feel a need to repeat the rinse, then do so. Another way to check is by taking a clean microfiber cloth and running it over the wheels. If you notice some amount of dirt being transferred, it means that you need to rinse again.

Power Wash the Wheels

Dry the Wheel

Make sure that the wheels are clean and there is no transfer on the microfiber towel. Once you are satisfied with the rinse, it is now time to dry the wheels. Take a towel that is dry and clean for drying the wheel. Most tyres give a matte finish which can indicate that they are completely clean and there is no product left on them either.

Dry the Wheel

Also read: Everything That You Need To Know About Performance Tyres

Conclusion

Cleaning tyres is also a good time to check their condition. Notice the wear and tear on the wheels. You should also check them for the appearance of tread and determine the tread depth using a tread depth gauge. Some car owners prefer using household alternatives for cleaning the wheels, however, it is better to use dedicated cleaners to avoid any damage. The cleaning tool should also be chosen carefully. For better results choose a brush that has stiff bristles so that it can remove the dirt and work well on firm rubber tyre walls as well. Some car owners may not have a pressure washer at home, but it is not essential to use. It just makes the cleaning process more efficient and effective. The steps mentioned above are a simple way to clean the wheels at home. Getting a professional car wash once in a while is also a good idea to keep the wheels clean and in good shape

About The Author